Главная Карта сайта Контакты
VESTNIK OF ASTRAKHAN STATE TECHNICAL UNIVERSITY. SERIES: MARINE ENGINEERING AND TECHNOLOGIES. 2009. № 1 (April)
Archive of issues
Russian


TITLE PAGE

1-2

CONTENTS

3-8

 

SHIPBUILDING, SHIP REPAIR AND FLEET RUNNING

Bugakov A. A The estimation criteria of seaport operation efficiency in the structure of the Kaliningrad region transport complex and the development of information interaction system
 

9-12

Petrov M. P., Lubenko V. N. Factors influencing the choice of optimal Caspian Sea shelf hydrocarbon’s transportation

13-17

Yakovlev P. V., Gorbaneva Е. A. Peculiarities of the heat exchange process at transportation of sulphur melt by water transport

18-21

Pichugin D. A. Features of formation of the complex of oil-and-gas production fleet for Northern Caspian Sea

22-24

Arefyev N. N. Research of pressuring stream of viscoplastic fluid in flat infinite slit with hydrogrease on single wall
 

25-33

Doan Van Tinh. About increase of durability of ship shafts with cracks

34-37

Dyatchenko S. V., Lyong Hung Ngoc. Determination of basic elements and features of medium fishing trawlers on initial stages of designing

38-43

Musagadzhiev A. M. Restoration of shaft sliding supports of ship diesel engines by means of powder welding

44-46

Andrusenko O. E., Matveev Yu. I. Influence of heat accumulation in bearing unit on strap clamp and fatigue failure of sliding bearings

47-49

Andrusenko O. E., Matveev Yu. I. Requirements to materials of the antifrictional layer used at restoration of sliding bearings of crankshafts

50-55

Nguyen Viet Hoan, Nguyen Doan Cuong. Analysis of the hull shape of vietnamese fishing vessels

56-59

Nguyen Doan Cuong, Lubenco V. N. Automatic calculation of regime on robot twin-arc welding of fillet and flat butt welds

60-65

Nguyen Doan Cuong, Lubenco V. N. Improvement of the process of fillet welding of bent and corrugated ship constructions with mobile welding robot

66-71

Potyanikhin A. N., Romanchenko M. K., Baranovsky A. M. Elastic material for antivibration constructions

72-75

Pritykin A. I. Stress concentration in floors with circular and oval holes

76-81

Proshin I. A., Timakov V. M., Proshkin V. N. Floating simulator for flight crew emergency training

82-87

Sakhno K. N. Main results of scientific researches in the field of tracing of ship pipelines

88-90

Yatsuk Yu. V. Estimation of ship rudder plating vibrations

91-94

Lidzhi-Goryaev R. A. Using nanomaterials in ship repairing process

95-98

Kononenko S. V., Zharkov M. V., Rogov А. V., Korotin В. S., Popov V. А. Data monitoring of intellectual mаgnitostriction level gauge for ship control systems

99-104

Tran Dinh Tien. Information technologies in shipbuilding: existing systems, spheres and possibilities of their use

105-109

Proshin I. A., Proshin D. I., Proshina R. D. Structural and parametric synthesis for mathematical models of test subjects based on observation data

110-115

Yatsuk Yu. V. Computational grid generation by a method of "Bézier volumes"

116-120

 

SHIP ELECTRIC POWER INSTALLATIONS AND MACHINE-PROPULSIVE COMPLEXES

Abul K. A. Estimation of possibilities of heat recovery plants of the propulsion engines of large-capacity vessels of transport fleet

121-125

Bangaev S. Sh., Saidov M. A., Perekrestov A. P. The designing of the construction of the universal preventer’s sealant

126-128

Bisenov A. R., Satzhanov B. S., Klimova E. V. The survey of alternative types of ship power installations

129-133

Vorobyev A. V., Vinogradov S. V., Kolyadin E. A. Scientific basis for improving operational parameters of marine waste-heat boilers

134-139

Gasangusenov О. G. The model of friction and deterioration of the faceplates of the coupling "piston groove-the first piston ring" in low-sized diesel engines

140-143

Gasangusenov О. G. The ways of increasing of technical level of marine small-sized diesels

144-146

Dadilov A. S., Gabalov G. M. The research of starting qualities in the mode of acceleration ship low sized diesel crankshaft with extraneous energy source

147-150

Zebbar Gallel, Satzhanov B. S. Account of temperature condition of a cylinders cartridge of marine diesel engine

151-155

Dorokhov A. F. Features of strength calculation of the bimetallic fire bottom of the cylinder covers of the marine diesels

156-160

Ezhov A. V., Bukin V. G., Kuzmin A. Yu. Generalization of experimental data on heat exchange at boiling of mix refrigerants with oil in evaporater of ships refrigeration instalation

161-164

Bukin A. V., Kuzmin A. Yu. The exergy analysis of the marine refrigerating machine work on the refrigerant R22 and mixtures R407C and R410A

165-168

Bukin A. V., Kuzmin A. Yu., Glazunov A. V. Use of exergy method for the analysis of rethrophite of marine refrigerating machines

169-171

Bukin V. G., Proshkin O. V. Research of change of two-phase flow hydrodynamics in evaporators of ship refrigerators

172-175

Ilyin A. К., Ilyin R. A. Thermodynamic efficiency of non-fuel heat power installations (by the example of ocean thermal power stations)

176-180

Ilyin R. A. Estimation of efficiency of combined heat power installations according to new exergy parameters

181-186

Ilyin A. К. Experimental data about use of the solar energy for water heating

187-192

Isaev A. P., Kargin S. A., Kolosov K. K. The analysis of methods of calculation of parameters of a working cycle of marine ICE

193-198

Isaev A. P., Klimova E. V., Kolosov K. K. Directions to increase a technical level of marine electric power installations

199-202

Кomarov V. V. Loads of shafting supports with frictionless bearings while centering main ship installations

203-208

Komarov V. V. Technological and constructive measures to provide great efficiency of flange couplings of ship shaftings

209-214

Kurganova E. A., Pokusaev M. N. On calculation of burning process of fuels by generalized heat-technical characteristics

215-218

Nguen Dihn Hiep, Dorokhov P. A. The research of the impact of compression ratio on indicators of marine ICE

219-222

Patrov F. V., Vakhromeev О. S. Urgency of the use of water-fuel emulsion in exploitation of marine ICE

223-225

Perekrestov A. P., Saidov M. A., Chanchikov V. A., Klykanova A. A. The formation of the antifriction covering of the friction surfaces with the help of the new antiwear additive

226-230

Sanaev N. K., Dorokhov A. F., Gabalov G. M. Research of the accuracy of mating of the block-cylinder sleeve and mirror of the cylinder-piston in the dependence on errors in assembling of the marine high-speed diesels

231-238

Satzhanov B. S. Research of functions of local thermal flows on the surface of cooling of the cartridge of the cylinder

239-244

Sibryaev К. О., Terenin I. N., Khalykov K. R. The analysis of torsional vibrations development in ship propeller shaft using flywheels-dampers

245-250

Yakhyaev N. Ya., Begov Zh. B., Batyrmurzaev Sh. D. New lubricant composition for updating surfaces of friction units of marine small-sized diesel engine

251-255

Yakhyaev N. Ya., Vagabov N. M. Complex method of the analysis of geometrical accuracy of cylinders during the assembling of ship low-sized diesel engines

256-261

Yakhyaev N. Ya., Makhin A. V. Automation of designing and technological preparation of propeller blade manufacturing

262-268

ABSTRACTS

269-280

AUTHORS OF THE ISSUE

281-290

INSTRUCTIONS TO THE AUTHORS

291-293

IMPRINT OF THE JOURNAL

294-294

Научный журнал "Вестник АГТУ"
Copyright © 2011 vestnik.astu.org

Яндекс.Метрика